Bronze shower head gives a soothing difference in your showering experience. It is not difficult to install the shower head. You will need to take precautions when removing the existing shower head to prevent damage to the shower arm or wall plumbing. The bronze shower head may need some force when turning it, which requires you to hold the shower arm tightly so that the arm does not twist with shower head.
And then place a cloth around the neck of the bronze shower head where it connects to the shower arm. Locking a pair of vice grips of cloth and connection. Keep shower arm with one hand near the wall and beat the vice grip counterclockwise to remove the shower head from the arm. By holding the shower arm in this way. You will avoid turning the shower arm inside the soft plumbing behind the wall.
12 Photos Gallery of: Installing Bronze Shower Head
Also clean the old plumber tape from the threads of the bronze shower head with a soft cloth. If necessary, remove the jammed plumbers tape from the wires with a stiff brush or an old toothbrush. Linda new plumbers tape around the threads of the shower arm. And also place the new rubber washer in the throat of bronze shower head. The tray should sit flat and have no bends or twists.